DUN Tutorial » Playstation 2 DUN (Dialup Networking) setup.
Fri, July 30, 2010
    ISP List    
 		 
ISP Reviews
 		 
Editorials
 		 
Forum
 		 
Dialup Networking
HowTo
 		 
How To Select
an ISP
 		 
DUN Errors
 		 
Review Your ISP
 		 
About The ISP List
 		 
· In order to set up a Dialup network configuration with any provider you will need to know:
1. The name of your Internet Service Provider.
2. Your login ID (also called user name, login name or screen name).
3. Your password
4. Your primary dial-up number
5. Your secondary dial-up number (if applicable)

· Always contact your phone company to verify if the numbers provided by your ISP are a local call. Calling plans in many areas are very confusing, and you may end up paying your telco several hundreds dollars at the end of the month. Dial 0 on your telephone and ask the operator whether the number you are going to use is a local call.

· We hate to remind, but always set your CAPS LOCK off before typing your password. In most cases passwords are case-sensitive.

· While we tried to make this tutorial as complete and straightforward as possible, it is a supplementary information and doesn't constitute professional customer support from your ISP. Keep your ISP's tecsupport phone number / e-mail address handy.

· Do not hesitate to contact us with comments and suggestions at feedback@theisplist.com
Playstation 2 (PS2) DUN setup
In order to set up a network configuration for the Network Adaptor of your PS2 (Playstation 2) you will need to know specific information about your Internet Service Provider before proceeding. You will need to know:

·The name of your Internet Service Provider.
·Your login ID and password.
·Your primary and secondary (optional) dial-up numbers.

Insert CD supplied with your Network Adapter. Select "ISP SETUP" and press the X button on your controller.

Step 1.
"Weclome" screen appears.
Press the X button.
Memory card warning appears; you have to have at least 132 K on your memory card free.
Press the X button.
Hopefully, you installed your Adapter properly, and the "Found Network Adapter" screen appears.
Press the X button
Press the X button again...
Select "NEW" and...

...you are right -- Press the X button.
Step 2.
Using the on-screen keyboard, enter a name for your new network configuration and press the X button. This name should represent where or how you will use this connection (i.e. home, office, modem, etc.)
Step 3.
You will be asked whether you subscribe to an Internet Service Provider. Select YES and press the X button if you already have a provider, select NO and press the X button if you do not.
Step 4. On this screen, highlight Dial-up Connection (Modem) and press the X button.
Step 5. Read the notices on the following screens and press the X button to proceed.
... Press the X button...
Step 6.
Select from the list of ISPs and press the X button. If your ISP is not on the list, highlight OTHER and press X.
Step 7.
Using the on-screen keyboard, enter your primary dial-up access number and press X.
Enter your secondary dial-up access number and press X.
Make any necessary dialing option adjustments.
Step 8.
Enter your User ID, Password, and Password once again for verification. Press the X button.
The Network Adaptor will test the network configuration.
Step 9.
Once a connection has been established, press the X button to save to your memory card.

If you cannot establish connection, check your settings and try again.

Reproduced with permission of the copyright owner. Further reproduction prohibited.
 
Please address all inquiries and questions to webmaster @ theisplist.com Copyright 2002, ISP Digest